Prototype Design Of Geophone Using Piezoelectric Sensor Based On Arduino Uno
DOI:
https://doi.org/10.58330/prevenire.v1i3.28Keywords:
Arduino Uno, Geophone, Vibration, Piezoelectric SensorAbstract
This study designed a geophone prototype using a piezoelectric sensor based on Arduino Uno. This research aims to create an alternative tool from the geophone that can measure vibrations on the ground. To find out if the geophone sensor that has been designed can work well, namely by knowing how far away the sensor can receive a given vibration source. Geophone design made using a piezoelectric sensor based on Arduino Uno R3. The components used to make the prototype will be connected to the Arduino, with the output as a byte value converted into a voltage. These results were obtained from testing by taking data using a vibration source, namely a dropped load. The testing process is carried out by dropping the vibration source from a height of 55 cm with variations in the distance as far as 20 cm, 30 cm, 50 cm and 60 cm. From the experiments carried out, the prototype made can function to read data from the dropped source. The farther the vibration source is dropped, the smaller the voltage generated. The results obtained from this study are the design of a geophone prototype made on a laboratory scale.
Downloads
References
Ardhi, C. K. M. (2018) ‘Perancangan Alat Pendeteksi Gempa Menggunakan Sensor Accelerometer Dan Sensor Getar | Ardhi | eProceedings of Engineering’, e-Proceeding of Engineering, 5(3), pp. 4019–4027. Available at: https://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/8134/8030.
Collette, C. et al. (2011) ‘Review of sensors for low frequency seismic vibration’, Report, 001(c), pp. 1–21.
Keyestudio (2021) Ks0272 keyestudio Analog Piezoelectric Ceramic Vibration Sensor, wiki.keyestudio.com. Available at: https://wiki.keyestudio.com/Ks0272_keyestudio_Analog_Piezoelectric_Ceramic_Vibration_Sensor.
Kurnadi, Mohamad. (2009). “Perancangan Sistem Akuisisi Data Gelombang Seismik Berbasis Mikrokontroler H8/3069F”, Skripsi, Universitas Indonesia, Depok
Li, Y. et al. (2020) ‘Design, Assembly and Testing of a Novel Piezoelectric Geophone Based on PVDF Film’, Integrated Ferroelectrics. Taylor & Francis, 211(1), pp. 69–81. doi: 10.1080/10584587.2020.1803676.
Potylitsyn, V. S. et al. (2019) ‘Analysis of passive seismoelectric measurements in earth’s noise fields’, International Journal of GEOMATE, 17(64), pp. 26–31. doi: 10.21660/2019.64.28878.
Preumont, A. (2018) ‘Electromagnetic and piezoelectric transducers’, in Solid Mechanics and its Applications. doi: 10.1007/978-3-319-72296-2_3.
Rizki, K. M., Maulana, R. and Kurniawan, W. (2018) ‘Implementasi Sensor Piezoelectric Sebagai Prototype Alat Musik Piano Berbasis Arduino UNO’, Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, 2(11), pp. 4564–4571.
Sembiring, A. S. (2017) Rancang Bangun Alat Pendeteksi Getaran dengan Metode Bandul Menggunakan Sensor MPU6050 Berbasis ATMEGA328. Universitas Sumatera Utara.
Song, J. et al. (2018) ‘Simulation and Experimental Study on Piezoelectric Geophone Core Based on PMN-PT’, Chinese Control Conference, CCC. Technical Committee on Control Theory, Chine
se Association of Automation, 2018-July(2), pp. 10267–10271. doi: 10.23919/ChiCC.2018.8483818.
Sujadi, H. and Bastian, A. (2007) ‘Implementasi Pengujian Alat Pendeteksi Pohon Keropos Menggunakan Mikrokontroller Arduino Uno R3 Dan Sensor Piezoelectric Teknologi telah menjadi komponen sangat penting yang digunakan sebagai sarana , untuk memudahkan manusia dalam meraih keberhasilan dar’, pp. 32–37.
Varadan, V. K. et al. (2000) ‘Design and development of a MEMS-IDT gyroscope’, Smart Materials and Structures. doi: 10.1088/0964-1726/9/6/322.
Wang, Y., Fu, N., Fu, Z., et al. (2019) ‘A semi-automatic coupling geophone for tunnel seismic detection’, Sensors (Switzerland). doi: 10.3390/s19173734.
Wang, Y., Fu, N., Lu, X., et al. (2019) ‘Application of a new geophone and geometry in tunnel seismic detection’, Sensors (Switzerland). doi: 10.3390/s19051246.
Xing, Y., Liu, S. and Wang, D. (2012) ‘Design and research on piezoelectric acceleration geophone’, Advanced Materials Research, 468–471, pp. 826–830. doi: 10.4028/www.scientific.net/AMR.468-471.826.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Journal of Multidisciplinary Science
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
